ET9 SP Super synthetic oil

SAE:0W-16 0W-20 0W-30 0W-40 5W-30 5W-40
Package specification:1L  4L  200L
◎  ET9 SP series is developed according to the technical characteristics of national VI emission standard and European models.
◎ Pure imported high-quality synthetic base oil and composite additives are selected for careful modulation.
◎ The newly upgraded "magnetocrystalline strong protection factor" can effectively reduce the phenomenon of low-speed early ignition (lspi) caused by turbocharged direct injection engine (tgdi) and provide sufficient anti-wear protection for timing chain and other parts.
◎ The advanced environmental protection formula with low sulfur, low phosphorus and low ash can protect the automobile exhaust aftertreatment system and reduce blockage.
◎ The extraordinary lubrication quality challenges your pure driving pleasure.

Product parameters
 
Product name Viscosity grade Quality certification and specifications Packing specification
ET9 SP Super synthetic oil 0W-16(GF-6B) API SP, especially recommended for modern high-performance engines with ultra-low viscosity requirements, meets the performance requirements of ILSAC GF-6B.  1L 
 
ET9 SP Super synthetic oil 0W-20(C5) API SP, BMW ll17fe +, MB-Approval 22971. Volkswagen VW 508.00, Volvo VCC RB s0-2ae 0w-20, Opel ov0401547, surpassing GM dexos1 Gen2, meeting the performance requirements of ILSAC gf-6 of the International Lubricating Oil Standards and Certification Committee, and meeting the quality standard of ACEA C5-16, a high-end specification of the European Automobile Manufacturers Association.  1L  4L 
 
ET9 SP Super synthetic oil 0W-30(C2) API SP, BMW bmwll-12fe, Peugeot Citroen PSA B71 2302 / 2312, Ford wss-m2c950-a / 946-a / 946-b1, Jaguar Land Rover stjlr 03.5007, meet the performance requirements of ILSAC gf-6a of International Lubricating Oil Standards and Certification Committee, and comply with the latest specification C2 quality standard of European Automobile Manufacturers Association ACEA-2016.  1L 
 
ET9 SP Super synthetic oil 0W-30(C3) API SP, Porsche C30, MB-Approval 229.51 / MB-Approval 229.52、
Volkswagen VW 504.00/507.00 meets the latest specification C3 quality standard of European Automobile Manufacturers Association ACEA-2016.
 1L  4L 
 
ET9 SP Super synthetic oil 0W-30(A3/B4) API SP, MB-Approval 229.5, BMW ll-01, VW 502.00/505.00
Renault RN 0710, Porsche a40, Opel Opel gm-ll-b-025, Peugeot Citroen
PSA B71 2296-2014 meets the latest specification A3 / B4 quality standard of European Automobile Manufacturers Association ACEA-2016.
 1L 
 
ET9 SP Super synthetic oil 0W-40(A3/B4) API SP, MB-Approval 229.5, BMW ll-01, VW 502.00/505.00
Renault RN 0710, Porsche a40, Opel Opel gm-ll-b-025
Peugeot Citroen PSA B71 2296-2014 complies with the latest specification A3 / B4 of European Automobile Manufacturers Association ACEA.
 1L  4L 
 
ET9 SP Super synthetic oil 5W-30(C2) API SP, BMW bmwll12fe, Peugeot Citroen PSA B71 2290, Ford wss-m2c950-a / 946-a / 946-b1, Chrysler meets Chrysler MS 6395, meets the performance requirements of ILSAC gf-6a of International Lubricating Oil Standards and Certification Committee, and complies with the latest specifications A5 / B5 and C2 quality standards of European Automobile Manufacturers Association ACEA-2016.  1L  4L 
 
ET9 SP Super synthetic oil 5W-30(C3) API SP, Chrysler ms6395, MB-Approval 229.51. GM 6094 M/
Gm4718m, Ford wss-m2c946-a / wss-m2c929-a, compliant with the European Automobile Manufacturers Association
ACEA-2016 latest specification C3 quality standard.
 1L  4L 
 
ET9 SP Super synthetic oil 5W-40(C3) API SP, Porsche C30 / C40, MB-Approval 229.51. European Association of automobile manufacturers
ACEA-2016 latest specification C3 standard.
 1L  4L 
 
ET8+ SP Advanced fully synthetic oil

SAE:0W-20 0W-30 5W-30 5W-40

Package specification: 1L ﹐ 4L ﹐ 200L

◎ Enlight Yingzun ET8 + SP series is specially developed and optimized for turbocharged direct injection and high-power naturally aspirated engines.

◎ It is made of pure imported high-quality synthetic base oil and composite additives.

◎ Excellent high-temperature oxidation resistance and clean dispersion, keep the engine powerful and clean inside, effectively control the formation of oil sludge carbon deposition and prolong the oil change cycle.

◎ It can effectively reduce the phenomenon of low-speed early combustion of the engine and effectively protect the wear of timing chain.  

◎ Conform to API SP quality grade standard of American Petroleum Association.

Product parameters
Product name Viscosity grade Quality certification and specifications Packing specification
ET8+
Advanced fully synthetic engine oil
0W-20(GF-6A) It meets the API SP quality grade standard of American Petroleum Association and the performance requirements of ILSAC GF-6A of International Lubricating Oil Standards and Certification Committee.  1L  4L 
 
ET8+
Advanced fully synthetic engine oil
0W-30(GF-6A) It meets the API SP quality grade standard of American Petroleum Association and the performance requirements of ILSAC GF-6A of International Lubricating Oil Standards and Certification Committee.  1L  4L 
 
ET8+
Advanced fully synthetic engine oil
5W-30(GF-6A) It meets the API SP quality grade standard of American Petroleum Association and the performance requirements of ILSAC GF-6A of International Lubricating Oil Standards and Certification Committee.  1L  4L 
 
ET8+
Advanced fully synthetic engine oil
5W-40(A3/B4) It complies with API SP quality grade standard of American Petroleum Association and meets the performance requirements of A3 / B4 latest specification of European Automobile Manufacturers Association ACEA-2016.  1L  4L 
 
ET8 SP Fully synthetic lubricating oil

SAE:5W-20 5W-30 5W-40

Package specification: 1L ﹐ 4L ﹐ 200L

◎ Enlight YingZun ET8 SP series is specially designed and developed for turbocharged and naturally aspirated engines.

◎ It is prepared by selecting new high-quality fully synthetic base oil and imported additives.

◎ Excellent high-temperature oxidation resistance and clean dispersion, keep the engine powerful and clean inside, effectively control the formation of oil sludge carbon deposition and prolong the oil change cycle.  

◎ Excellent anti-wear performance, prolonging the service life of the engine, good lubrication characteristics, reducing engine noise and providing you with a quieter driving environment.

Product parameters
Product name Viscosity grade Quality certification and specifications Packing specification
ET8
Fully synthetic lubricating oil
5W-20(GF-6A) It meets the API SP quality grade standard of American Petroleum Association and the performance requirements of ILSAC GF-6A of International Lubricating Oil Standards and Certification Committee.  1L  4L 
 
ET8
Fully synthetic lubricating oil
5W-30(GF-6A) It meets the API SP quality grade standard of American Petroleum Association and the performance requirements of ILSAC GF-6A of International Lubricating Oil Standards and Certification Committee.  1L  4L 
 
ET8
Fully synthetic lubricating oil
5W-40 Comply with API SP quality grade standard of American Petroleum Association.  1L  4L 
 
ET7 SP Synthetic engine oil

SAE:5W-30 5W-40 10W-40

Package specification: 1L ﹐ 4L ﹐ 200L

◎ Enlight  YingZun ET7 SP is applicable to gasoline engine.

◎ It is prepared by selecting new high-quality base oil and imported additives.

◎ The magnetic crystal strong protection factor of Yinglai shell lubricating oil can make the oil film stronger, and the long-term cleaning technology can effectively inhibit the generation of oil sludge carbon, reduce engine wear, save fuel, have long-lasting and strong power, and effectively protect the engine.

◎ Conform to API SP quality grade standard of American Petroleum Association.

Product parameters
Product name Viscosity grade Quality certification and specifications Packing specification
ET7
Synthetic engine oil
5W-30(GF-6A) It meets the API SP quality grade standard of American Petroleum Association and the performance requirements of ILSAC GF-6A of International Lubricating Oil Standards and Certification Committee.  1L  4L 
 
ET7
Synthetic engine oil
5W-40 Comply with API SP quality grade standard of American Petroleum Association.  1L  4L 
 
ET7
Synthetic engine oil
10W-40 Comply with API SP quality grade standard of American Petroleum Association.  1L  4L 
 
ET6 SL Synthetic lubricating oil

SAE:5W-30 10W-40 15W-50

Package specification:  4L ﹐ 200L

◎ YingZun ET6 SL is applicable to gasoline engine and CNG / LNG / LPG gas engine.

◎ It is made of new high-quality base oil and imported additives.

◎ The magnetic crystal strong protection, long-term cleaning and dispersion technology of Yinglai shell lubricating oil has the characteristics of energy saving and wear reduction, fuel saving, inhibiting the generation of carbon sludge, improving power and providing lasting protection for the engine.

◎ Meet API SL quality grade requirements of American Petroleum Institute.

Product parameters
Product name Viscosity grade Quality certification and specifications Packing specification
ET6
Synthetic lubricating oil
5W-30 It meets the quality level requirements of API SL ILSAC GF-5.  4L 
 
ET6
Synthetic lubricating oil
10W-40(A3/B3) Meet the quality grade requirements of API SL ACEA A3 / B3.  4L 
 
ET6
Synthetic lubricating oil
15W-50 Meet API SL quality grade requirements.  4L 
 
ET5 SJ High cleaning multi-stage lubricating oil

SAE:5W/30  10W/30  10W/40  20W/50

Package specification: 3.5L ﹐ 4L ﹐ 200L

◎ Enlight YingZun ET5 SJ / CF is applicable to gasoline, diesel and CNG / LNG / LPG gas engines.

◎ It is made of excellent base oil and imported additives.

◎ Mhe magnetic crystal strong protection and long-term cleaning and dispersion technology of Yinglai shell lubricating oil has good cleanliness and dispersion, effectively inhibits the generation of carbon sludge, keeps the engine clean and reduces fuel consumption; Excellent thermal stability and low temperature fluidity, reduce the internal resistance of the engine and improve the power.

◎ Meet the requirements of API SJ quality grade.

Product parameters
Product name Viscosity grade Quality certification and specifications Packing specification
ET5
High cleaning multi-stage lubricating oil
5W-30 Comply with API SJ quality grade requirements.  3.5L  4L 
 
ET5
High cleaning multi-stage lubricating oil
10W-30 Comply with API SJ quality grade requirements.  3.5L  4L 
 
ET5
High cleaning multi-stage lubricating oil
10W-40 Comply with API SJ quality grade requirements.  3.5L  4L 
 
ET5
High cleaning multi-stage lubricating oil
20W-50 Comply with API SJ quality grade requirements.  3.5L  4L 
 
ERQ Dual fuel lubricating oil

SAE:5W/30  5W/40  10W/40

Package specification: 4L  200L

◎ YingZun dual fuel ERQ is applicable to cars equipped with dual fuel engines and light load vehicles.

◎ It is made of high-quality base oil and imported additives.

◎ It is universal in all seasons and meets the high temperature conditions of CNG / LPG engine. It has good high temperature oxidation resistance to ensure the normal operation of the engine under various working conditions.

◎ Effectively reduce the products of deposits in the engine and avoid early ignition caused by spark plug deposits.

Product parameters
Product name Viscosity grade Quality certification and specifications Packing specification
ERQ
Dual fuel lubricating oil
5W-30

YingZun dual fuel ERQ SL / CF 5W / 30 is applicable to cars equipped with dual fuel engines and light load vehicles.

 4L 
 
ERQ
Dual fuel fully synthetic lubricating oil
5W-40 YingZun dual fuel ERQ SP 5W / 40 is applicable to cars equipped with dual fuel engines and light load vehicles.  4L 
 
ERQ
Dual fuel lubricating oil
10W-40 YingZun dual fuel ERQ SL / CF 10W / 40 is applicable to cars equipped with dual fuel engines and light load vehicles.  4L