X9 SP Super synthetic lubricant

SAE:0W-16  0W-20  0W-30  0W-40  5W-30  5W-40

Package specification: 1L  4L  

◎ It is developed according to the technical characteristics of national VI emission standard and European models.  

◎ Pure imported high-quality synthetic base oil and composite additives are selected and carefully prepared.

◎ The newly upgraded "magnetic crystal strength protection factor" can effectively reduce the phenomenon of low-speed early ignition (lspi) caused by turbocharged direct injection engine (tgdi) and provide sufficient anti-wear protection for timing chain and other parts.

◎ Advanced environmental protection formula with low sulfur, low phosphorus and low ash can protect the automobile exhaust after treatment system and reduce blockage.

◎ The extraordinary lubrication quality challenges your pure driving pleasure.

Product parameters
Product name Viscosity grade Quality certification and specifications Packing specification
YingSu X9
SP super synthetic lubricant
0W-16(GF-6B) Meet the following specifications:
Apisp, especially recommended for modern high-performance engines with ultra-low viscosity requirements, meets the performance requirements of ILSAC GF-6B.
 1L  
YingSu X9
SP super synthetic lubricant
0W-20(C5) Meet the following specifications:
API SP, BMWLL17FE+, MB-Approval 22971. Volkswagen VW 508.00, Volvo VCC RBS0-2AE 0W-20, Opel OV0401547, surpassing GM dexos1Gen2, meeting the performance requirements of ILSAC GF-6A of the international Lubricating oil standard and Certification Committee, and meeting the quality standard of ACEA C5-16, a high-end specification of the European Automobile Manufacturers Association.
 1L  4L  
YingSu X9
SP super synthetic lubricant
0W-30(C2) Meet the following specifications:
API SP, BMWLL-12FE, PSA B71 2302/2312, Ford WSS-M2C950-A/946-A/946-B1, STJLR03.5007. Meet the performance requirements of ILSAC GF-6A of International Lubricating oil Standards and Certification Committee, and meet the C2 quality standard of the latest specification of European Automobile Manufacturers Association ACEA-2016.
 1L  
YingSu X9
SP super synthetic lubricant
0W-30(C3) Meet the following specifications:
API SP, Porsche C30, MB-Approval 229.31/MB-Approval 229.51/MB-Approval 229.52. VW50400/ 507.00. It complies with the latest specification C3 quality standard of European Automobile Manufacturers Association ACEA-2016.
 1L  4L  
YingSu X9
SP super synthetic lubricant
0W-30(A3/B4) Meet the following specifications:
API SP, MB-Approval 229.3/MB229.5. BMWLL-01, VW502.00/505.00, Renault RN 0710, Porsche A40, Opel GM-LL-B-025, Peugeot Citroen PSA B712296-2014, meeting the latest specification A3/B4 quality standard of European Automobile Manufacturers Association ACEA-2016.
 1L  
YingSu X9
SP super synthetic lubricant
0W-40(A3/B4) Meet the following specifications:
API SP, MB-Approval 229.3/MB229.5. BMWLL-01, VW502.00/505.00, Renault RN 0710, Porsche A40, Opel GM-LL-B-025, Peugeot Citroen PSA B712296-2014, meeting the latest specification A3/B4 quality standard of European Automobile Manufacturers Association ACEA-2016.
 1L  4L  
YingSu X9
SP super synthetic lubricant
5W-30(C3) Meet the following specifications:
API SP, Chrysler MS6395, MB-Approval 229.31/MB229.51. GM 6094M/GM4718M, Ford WSS-M2C946-A/WSS-M2C929-A, comply with the latest specification C3 quality standard of European Automobile Manufacturers Association ACEA-2016.
 1L  
YingSu X9
SP super synthetic lubricant
5W-30(C2) Meet the following specifications:
API SP, BMWLL12FE, PSA B71 2290, Ford WSS-M2C950-A/946-A/946-B1, Meets Chrysler MS6395, meets the performance requirements of ILSAC GF-6A of International Lubricating oil Standards and Certification Committee, and complies with the latest specifications A5/B5 and C2 quality standards of European Automobile Manufacturers Association ACEA-2016.
 1L  4L  
YingSu X9
SP super synthetic lubricant
5W-40(C3) Meet the following specifications:
API SP, Porsche C30/C40, MB-Approval 229.31/51. Comply with the latest specification C3 of European Automobile Manufacturers Association ACEA-2016.
 1L  4L  
X8 SP Full synthetic lubricant

SAE:0W-20  0W-30  5W-20  5W-30  5W-40

Package specification: 1L  4L  

◎ Specially designed and developed for turbocharged and naturally aspirated engines.

◎ It is prepared by selecting new high-quality fully synthetic base oil and imported additives.

◎ Excellent high-temperature oxidation resistance and clean dispersion, keep the engine powerful and clean inside, effectively control the formation of oil sludge carbon deposition and prolong the oil change cycle.

◎ Excellent anti-wear performance, prolonging the service life of the engine, good lubrication characteristics, reducing engine noise and providing you with a quieter driving environment.

Product parameters
Product name Viscosity grade Quality certification and specifications Packing specification
YingSu X8
SP Full synthetic lubricant
0W-20(GF-6A) Comply with API SP quality grade requirements of API and ILSAC GF-6A performance requirements of international Lubricating oil standardization and Approval Committee.  1L  4L  
YingSu X8
SP Full synthetic lubricant
0W-30(GF-6A) Comply with API SP quality grade requirements of API and ILSAC GF-6A performance requirements of international Lubricating oil standardization and Approval Committee.  1L  4L  
YingSu X8
SP Full synthetic lubricant
5W-20(GF-6A) Comply with API SP quality grade requirements of API and ILSAC GF-6A performance requirements of international Lubricating oil standardization and Approval Committee.  1L  4L  
YingSu X8
SP Full synthetic lubricant
5W-30(GF-6A) Comply with API SP quality grade requirements of API and ILSAC GF-6A performance requirements of international Lubricating oil standardization and Approval Committee.  1L  4L  
YingSu X8
SP Full synthetic lubricant
5W-40 Comply with API SP quality grade requirements of API.  1L  4L  
YingSu X8
SP Full synthetic lubricant
5W-40(A3/B4) Comply with the latest specification A3/B4 quality standard of API SP European Automobile Manufacturers Association ACEA-2016.  1L  4L  
X7 SP Synthetic technology engine oil

SAE:5W-30  5W-40  10W-40

Package specification: 1L  4L 

◎ It is prepared by selecting new high-quality synthetic base oil and imported additives.

◎ Unique cleaning factor can effectively control the generation of oil sludge carbon deposition, continuously keep the engine clean, improve power and provide lasting protection for the engine.

◎ Excellent anti-wear performance, effectively reduce wear, prolong engine life, good oxidation resistance and high temperature stability, and provide more long-term lubrication protection.

Product parameters
Product name Viscosity grade Quality certification and specifications Packing specification
YingSu X7
SP synthetic technology engine oil
5W-30(GF-6A) It conforms to API SP quality grade standard of API and meets the performance requirements of ILSAC GF-6A of international engine oil standardization and Approval Committee.  1L  4L  
YingSu X7
SP synthetic technology engine oil
5W-40 Comply with API SP quality grade requirements of API.  1L  4L  
YingSu X7
SP synthetic technology engine oil
10W-40 Comply with API SP quality grade requirements of API.  1L  4L  
YingSu X6 SL Synthetic lubricant oil

SAE:5W-30  10W-40

Package specification: 4L  170Kg

◎ It is prepared by selecting new high-quality base oil and imported additives.

◎ Long term cleaning technology can effectively inhibit the formation of oil sludge carbon deposition, reduce engine wear, save fuel consumption, have stronger power and prolong engine life.

◎ Good anti-wear performance, improved engine efficiency and more comfortable driving.

Product parameters
Product name Viscosity grade Quality certification and specifications Packing specification
YingSu X6
SL synthetic lubricant oil
5W-30(GF-5) It meets the quality level requirements of API SL ILSAC GF-5. 4L  170Kg
YingSu X6
SL synthetic lubricant oil
10W-40(A3/B3) Meet the quality grade requirements of API SL ACEA A3/B3. 4L   170Kg
YingSu X5 SJ HD clean engine oil

SAE:5W-30  10W-30  10W-40  20W-50 

Package specification: 3.5L  4L 

◎ It is made of selected high-quality base oil and imported additives.

◎ Excellent detergency, keep the engine clean and make the engine power stable and lasting.

◎ Good anti-wear performance makes the engine run more smoothly and prolong the service life of the engine.

◎ Meet the requirements of API SJ quality grade.

Product parameters
Product name Viscosity grade Quality certification and specifications Packing specification
YingSu X5
SJ HD clean engine oil
5W-30 Comply with API SJ quality grade requirements. 3.5L 4L  
YingSu X5
SJ HD clean engine oil
10W-30 Comply with API SJ quality grade requirements. 3.5L 4L  
YingSu X5
SJ HD clean engine oil
10W-40 Comply with API SJ quality grade requirements. 3.5L 4L  
YingSu X5
SJ HD clean engine oil
20W-50 Comply with API SJ quality grade requirements. 3.5L 4L